Category: sound-amplifiers

Topp Pro TPM 8.2000

ModelTPM8.2000
Mono ChannelsMicrophone InputElectronically BalancedFrequency Response20Hz to 220KHz, ± 3dBDistortion (THD/N)0.1% at 1KHzSensitivity -40dBuSNR=-80dBuPAD -20dBPhantom Power +15V with switch controlLine inputElectronically BalancedFrequency Response20Hz – 22KHz ± 3dBDistortion (THD/N)0.1% at 1KHzSensitivity range -10dBu
Stereo ChannelsLine inputElectronically BalancedFrequency Response20Hz – 55KHz ± 3dBDistortion (THD/N)0.1% at 1KHzSensitivity range -30dBuSNR=-98dBuPhantom Power +15V with switch control
ImpedancesMicrophone Input1.4K OhmAll other input10K OhmTape Out1k OhmAll other Out120 Ohmios
Channels EQ (mono)High±15dB @ 12KhzMid±12dB @ 2.5KhzLow±15dB @ 80Khz
Channels EQ (stereo)High±15dB @ 12KhzMid±12dB @ 2.5KhzLow±15dB @ 80Khz
DSP SectionA/D and D/A Converters24 BitDSP resolution24 BitType of effectsVocal, Small Room, Large Hall, Echo, Echo+Verb, Flanger, +Verb, Plate, Chorus+GTR, Rotary+GTR, Tremolo+GTRPreset100Controls100 position preset selector (10 preset x 10 variations)Mute switch with LED indicator, CLIP LED
LampPin2 (+) y Pin1 (-) +12V DC 0.5A
Main Mix SectionMain, Aux, output0dB unbalanced, 1/4″ connectorsMain, Monitor EQ±15dB@7 Bands (63,160,400,1K,2.6K,6.3K,16KHz)Noise (BUS Noise)= -70dB @ 20KHz ~ 22KHz (channel & MAIN level at 0dB, other at minimum, DSP mute)
CompressorThreshold -40dB ~ +22dB / Ratio (variable) 2:1 to 8: 1(Limit)Comp. / Lim.Attack Time: 1ms; release time: 2s
Power SectionPower continuous 1KHz, THD 0.5%2 x390W @ 4 Ohm2 x 270W @ 8 OhmEIAJ 1KHz, THD 1%2 x 500W @ 4 OhmBridge mode1000W @ 8 Ohm EIAJ738W @ 8 Ohm RMS
ProtectionThermal ProtectionOver-temperature power limitingThermal shutdownTemperature controlled 12V DC fan outputShort protectionShort-circuit protectionOverload output protectionLimiterClip limiterPermanent signal limiterHigh Frequency Protection
Static Power ConsumptionNo output power State at 230V35W
Power SupplyMain voltage100 – 120VAC 60Hz220 – 240VAC 50Hz100 – 120V: T 12A 250V FUSIBLE210 – 240V: T 6.3A 250V FUSIBLE
PhysicalDimension (W x D x H)581 x 280 x 274 mmWeightNW: 16.52

Proel PA AMP240V4

Specifications:

Four zones output at 100V selectable independlly through a front keyboard
Impedance constant outputs (4W) and constant voltage outputs (25, 70, 100 V)
Four MIC/LINE combo (XLR – ¼” jack) inputs
24V Phantom supply
Vocal activating priority MIC1 input – VOX
PRE-OUT output
AMP-IN input
RCA input
LINE OUT output
LED level meter
Hold On and Monitor outputs
Signal peak LED
Signal present LED
Telephone-line signal input
Bass and Treble EQ controls
Master output volume control
Volume controls for each zone
Five independent level controls for input signals (INPUT 1 ÷ INPUT 5)
A screw for ground wiring
Rear Power supply selector 230/117V~
Power supply: 230/117 V~ 50-60 Hz 24 V DC
Rack mount brackets included

Wharfedale CPD 4800

SPECIFICATIONS

Stereo Power Output : RMS
8Ω x 2 1000W
4Ω x 2 1500W
Bridged Mono Power Output : RMS
8Ω 3000W
4Ω 4800W
Frequency Response 20Hz – 30kHz
Topology Class H
Inputs 2 x XLR
Outputs 2 x NL4 (speakON compatible),2 x binding posts, 2 x XLR
Input Sensitivity & impedance
Sensitivity 0dBu (0.775Vrms)
Balanced XLR input 20KΩ
Maximum Input Level 22dBu (9.7Vrms)
Voltage Gain 42dB
Slew Rate >40V / us
Crosstalk <-75dB S/N >100dB
Distortion (1W) <0.02% Damping Factor >300
Controls
Front panel AC Switch, CH 1 and CH 2 Gain Knobs
Rear panel Parallel, Stereo & Bridge Mode Switch; Limiter Switch
Protections Thermal protect, Over-current protect, Output DC protect, Output short protect, Power on/off mute
Indicators Power, Protect, Signal, Peak
Cooling Variable Speed Fan
Dimensions 88 x 483 x 450mm
Net Weight 23.5kg / 51.80lbs
Gross Weight 27kg / 59.52lbs

Wharfedale Pro CPD3600

SPECIFICATIONS

Stereo Power Output
8 Ohms x 2 870W RMS
4 Ohms x 2 1300W RMS
Bridged Mono Output
8 Ohms 2590W RMS
4 Ohms 3600W RMS
Inputs 2 x XLR
Outputs 2 x XLR, 2 x Speakon
Frequency Response 20Hz – 30KHz
Topology Class H
Sensitivity 0dBu (0.775Vrms)
Input Impedance 20K Ohms
Maximum Input Level 22dBu (9.7Vrms)
Slew Rate >40V / us
Crosstalk <-70dB Signal to Noise >100dB
Protection Switchable Limiter, Thermal protect, Over-current protect, Output DC protect, Output short protect, Power on/off mute
Display 4 segment LED
Cooling Variable Speed Fan
Dimensions 88 x 483 x 451mm
Net Weight 24kg / 52.91lbs
Gross Weight 26kg / 57.32lbs

Wharfedale Pro CPD1600

SPECIFICATIONS

Stereo Power Output
8 Ohms x 2 400W RMS
4 Ohms x 2 620W RMS
Bridged Mono Output
8 Ohms 1200W RMS
4 Ohms 1600W RMS
Inputs 2 x XLR
Outputs 2 x XLR, 2 x Speakon
Frequency Response 20Hz – 30KHz
Topology Class AB
Sensitivity 0dBu (0.775Vrms)
Input Impedance 20K Ohms
Maximum Input Level 22dBu (9.7Vrms)
Slew Rate >40V / us
Crosstalk <-70dB Signal to Noise >100dB
Protection Switchable Limiter, Thermal protect, Over-current protect, Output DC protect, Output short protect, Power on/off mute
Display 4 segment LED
Cooling Variable Speed Fan
Dimensions 88 x 483 x 322mm
Net Weight 17kg / 37.48lbs
Gross Weight 19kg / 41.89lbs

YAMAHA P2500S

Specifications:

– 2-channel Pro Audio amplifier
– power output at 20-20,000 Hz:
– 250 watts RMS per channel at 8 ohms
– 310 watts RMS per channel at 4 ohms
– 620 watts RMS (mono) at 8 ohms in bridged mode
– power output at 1 kHz:
– 275 watts RMS per channel at 8 ohms
– 390 watts RMS per channel at 4 ohms
– 780 watts RMS (mono) at 8 ohms in bridged mode
– 1300 watts RMS (mono) at 4 ohms in bridged mode
– frequency response: 20-50,000 Hz (-1.5 dB)
– signal-to-noise ratio: 100 dB

inputs – XLR and 1/4″ TRS for channels A and B
outputs – Neutrik Speakon jacks, 5-way binding posts, 1/4″ jacks
independent right- and left-channel level controls for precise volume matching
variable high- and low-pass crossovers for each channel (25-150 Hz)
variable speed fan for heat dissipation
DC, short circuit, and overload protection with automatic reset
front-panel LEDs indicate Power, Active Status, and Protection Warning for easier troubleshooting
rack mount ears included

weight – 14 kg.
dimensions – 480 x 88 x 456 mm

Wharfedale Pro DW2400

Specifications:

Signal to noise ratio – 106dB
SLEW RATE – 50V/us
DAMPING FACTOR – >450
COOLING – Front-to-rear
POWER REQUIREMENTS – AC~230V 50Hz-60Hz
CROSSTALK – <-80dB PROTECTION - Audio limiters, thermal overload,short circuit THD at rated output power - <0.1% Net weight - 21.5kg Gross weight - 23kg Load Impedance - 8ohm ,4ohm ,2ohm Current Consumption - 380W ,610W ,935W Frequency Response - 20Hz-20kHz (0~2dB) Rated output power - 2x590W ,2x910W ,2x1200W Maximum bridged output power (THD<1%,1KHz) - 1800W ,2400W Maximum RMS voltage swing (THD=1%,1KHz) - 68.7V DIM30(3.15KHz,15KHz) - <0.1% IMD-SMPTE(60Hz,7KHz) - <0.1% Input senstitivity (1KHz) - 1.0V Dimensions(WxDxH) - 483x380x88mm Input impendance(20Hz-20KHz,balanced) - 20kO / balanced ,10kO / unbalanced

Wharfedale Pro DW800

Specifications:

SIGNAL TO NOISE RATIO – 105dB
SLEW RATE – 32V/us
DAMPING FACTOR – >350
COOLING – Front-to-rear
POWER REQUIREMENTS – AC~230V 50Hz-60Hz
CROSSTALK – <-80dB PROTECTION - Audio limiters, thermal overload, short circuit THD AT RATED OUTPUT POWER - <0.1% NET WEIGHT - 17.5kg GROSS WEIGHT - 19kg LOAD IMPEDANCE - 8ohm , 4ohm , 2ohm CURRENT CONSUMPTION - 220W , 334W , 380W FREQUENCY RESPONSE - 20Hz-20kHz (0~2dB) RATED OUTPUT POWER - 2x230W , 2x330W , 2x340W MAXIMUM BRIDGED OUTPUT POWER (THD<1%, 1KHZ) - 650W , 800W MAXIMUM RMS VOLTAGE SWING (THD=1%, 1KHZ) - 42.8V DIM30(3.15KHZ,15KHZ) - <0.1% IMD-SMPTE(60HZ,7KHZ) - <0.1% INPUT SENSTITIVITY (1KHZ) - 1.0V DIMENSIONS(WXDXH) -483x380x88mm INPUT IMPENDANCE(20HZ-20KHZ,BALANCED) - 20kΩ / balanced , 10kΩ / unbalanced

Wharfedale Pro S1000

Specifications:

INPUT SENSITIVITY : 0.72V / -0.65dBu
INPUT IMPEDANCE : Balanced: 20kΩ Unbalanced: 10kΩ
VOLTAGE GAIN : 33dB
FREQUENCY RESPONSE :
• 20Hz-20kHz 0/-0.5dB
• 10Hz-40kHz 0/-2dB
OUTPUT POWER :
STEREO :
• 215 Watts per channel into 8 ohms (0.1% THD @ 1kHz)
• 350 Watts per channel into 4 ohms (0.1% THD @ 1kHz)
• 462 Watts per channel into 2 ohms (0.1% THD @ 1kHz)
BRIDGED :
• 630 Watts into 8 ohms (0.1% THD @ 1kHz)
• 910 Watts into 4 ohms (0.1% THD @ 1kHz)
THD+N : <0.02% HUM AND NOISE : -95dBu MAXIMUM INPUT LEVEL : +22dBu CONTROLS : • LOW CUT FILTER 50Hz-6dB(-12dB/oct); 30Hz-6dB(-12dB/oct) • SIGNAL INDICATORS Turns on approx -35dBu • CLIP INDICATORS Turns on approx 350Wx2/4Ω output • LIMITER Turns on approx 350Wx2/4Ω output • AMPLIFIER PROTECTION Mute function; DC detection; Overload and short detection; Temperature detection POWER AMP TYPE : Class AB complementary linear output AC POWER OPTIONS : AC100-120V~ / 220-240V~, 50/60Hz DIMENSIONS (HXWXD) : less than 0.05% • MM 96mm x 482.6mm x 427mm WEIGHT : • KG 15.4kg

Behringer iNUKE NU600

Specifications:

Number of Channels – 2
Power Class – Class D
Watts/Side @ 8 ohms – 1500W/side @ 8 ohms
Watts/Side @ 4 ohms – 3000W/side @ 4 ohms
Cooling System – Fan
Inputs – 2 x XLR/TRS Combo
Outputs – 2 x speakON
Rack Spaces – 2U
Dimensions – 3.7″ x 12.2″ x 19″
Weight – 11.7 lbs.