Category: sound-mixers

ToppPro TP MXI1222CFX

12 channel audio mixer with EFX processor and compressors

  • 4 mono inputs withXLR and Balanced TRS jack + 2 additional XLR mono inputs
  • 4 Stereo inputs with Balanced TRS jack
  • 4 compressors on MIC Inputs
  • 3 band EQ with parametric mid-frequencies on all mono inputs andLo cut
  • 3 Aux sends (Aux 1-2 Pre-Post switchable)
  • Mute, Solo, 2-Track, Control Room, Phantom 48V functions
  • 4 Subgroups
  • 24 bits internal EFX processor
  • Integrated USB media Player
  • 11 Faders
Mono channels
Microphone inputXLR with balanced
Frequency response10Hz to 55KHz,+/-3dB
Distortion (THD+N)<0.03% at +0dB ,22Hz~22KHz A-weighted
Gain range0dB to 50dB
Max. Input+21 dB
LOW CUT75Hz
SNR<-100dBr A-weighted
Phantom power+48V with switch control
Line input1/4” TRS with balanced
Frequency response10Hz to 55KHz,+/-3dB
Distortion (THD+N)<0.03% at +0dB ,22Hz~22KHz A-weighted
Sensitivity range+20dB~ -30dB
CompressorGAIN: 0~9dB / THRESHOLD: 20dB—>5dB
Stereo input channels
Mic inputXLR with balanced
Line input1/4′ TRS with balanced
Frequency response10Hz to 55KHz, +/-3dB
Distortion (THD+N)<0.03% at +0dB ,22Hz~22KHz A-weighted
Sensitivity range+20dBu~ -30dBu
SNR<-100dBr A-weighted
RCA input channels
RCA inputRCA with un-balanced
Frequency response10Hz to 55KHz,+/-3dB
Distortion (THD+N)<0.03% at +0dB ,22Hz~22KHz A-weighted
Sensitivity range+20dBu~ -30dBu
SNR<-100dBr A-weighted
Channels EQ
ChannelMono / Stereo
High+/-15dB @12KHz / +/-15dB @12KHz
Mid+/-15dB @100KHz -8KHz / +/-15dB @3KHz or +/-15dB @500Hz
Low+/-15dB @80Hz / +/-15dB @80Hz
Impedances
Microphone input1.8K Ω
All other input10K Ω or greater
Tape out1K Ω
All other out120 Ω
DSP section (options)
A/D and D/A converters24bit
Type of effectsVocal, Small Room, Large Hall, Echo, Echo+Verb, Flange+Verb, Plate, Chorus+GTR, Rotary+GTR, Tremolo+GTR
Controls100 position preset selector(10 preseter * 10 variation), Mute switch & Foot-switching with LED indicator
FOOT-SWTIP: FX – SLEEVE: GND
Main mix section
Max. MAIN MIX output+26dBu XLR balanced (+20dBu un-balanced)
AUX rangeOFF to +10dB
Fader rangeOFF to +10dB
PHONES/CONTROL-ROOM rangeOFF to +10dB
Hum & Noise<-80dB @ 20Hz~22KHz A-weighted, 1 channel & MAIN level:0dB, the other: Minimum
Crosstalk<-80dB @ 0dB 20Hz~22KHz A-weighted, MAIN level:0dB, the other :minimum
Power supply
Main voltage100-240V~ 50/60Hz
FuseT1.25A AC250V
Rated power consumption30W

ToppPro TP MX1222FX

12 channel audio mixer with EFX processor

  • 6 mono inputs with gold plated XLR and Balanced TRS jack
  • Stereo inputs with Balanced TRS jack
  • 3 band EQ with parametric mid-frequencies on all mono inputs and 75 Hz lo cut
  • 2 Aux sends (Aux 1 Pre-Post switchable)
  • Mute, Solo, 2-Track, Control Room, Phantom 48V functions
  • 2 Subgroups
  • 24 bits internal EFX processor
  • 12 Faders
  • Slot for MP3 modules (TP TACMP3T-TP TACMP3R)

Inputs Channel

Microphone InputElectronically Balanced XLR Balanced
Frequency Response20Hz to 50KHz± 3dB
Distortion (THD & N}<0.005% to +4dBu, 1 KHz
Gain RangeOdBaSOdB MIC
SNR (Signal to Noise Ratio}<-100dB
Phantom Power+48V with switch
Line InputElectronically Balanced 1/4″ TRS
Frequency Response20Hz to 50KHz ±3dB
Distortion<0.005% to +4dBu, 1 KHZ
Sensitivity+1 5dBu ±3dB

Impedances

Microphone Input1.4KOhm
All Other Inputs10KOhm
Tape Out1k0hm
All Other Output120 Ohm

Equalization

Mono Channel
High±15dB@ 12Khz
Mid±15dB Frequency Range 100Hz to BKHz
Low±1 5dB@80Khz
Stereo Channel
High±15dB@ 12Khz
High Mid±15dB@3KHz
Low Mid±15dB@ 500hz
Low±1 5dB@80Khz

DSP Section

ND & D/A Converters24 Bit
DSP Resolution24 Bit
Type of EffectsVocal, Small Room, Large Hall, Echo, Echo+Verb, Flanger+Verb, Plate, Chorus GTR, Rotary GTR, Tremolo GTR
Presets100
Controls100 Position PRESET Selector (10 Presets, 10 Variations), Mute Switch with Indicator Light

Main Mix Section

Bus NoiseFader OdB, Mute -82dB (Ref. +4dB), All input channels, Unity Gain -70dB
Max. Output+22dBu Unbalanced, 1/4″ Jades
Aux Sends Max. Outputs+22dBu Plate, Chorus GTR, Rotary GTR, Tremolo GTR
Aux Returns Gain Range-co to + 15d B

USB InputBuilds in the USB full speed (1 2Mbps), Supports the USB mass storage classFAT AnalysisSupports FAT16 and FAT32 / Support VFAT (long file name)MP3 DecodeSupports Sample Rates SKHz, 16KHz, 32KHz, 11.025KHz, 22.05KHz, 44.1 KHz, 12KHz, 24KHz and 48KHz / Supports bit rate 8 to 320 and VBR (Variable Bit rate) Except free formatElectrical Specifications

Frequency Response20Hz-20KHz
SignaVNoise Ratio>90dB
1 KHz Distortion<0.04%

Power Supply

Main Voltage100-240V~ 50/60Hz
Fuse1.6AL AC250V

ToppPro TP MXI1422CFX

14 channel audio mixer with EFX processor and compressors
6 mono inputs withXLR and Balanced TRS jack + 2 additional XLR mono inputs
4 Stereo inputs with Balanced TRS jack
6 compressors on MIC Inputs
3 band EQ with parametric mid-frequencies on all mono inputs andLo cut
3 Aux sends (Aux 1-2 Pre-Post switchable)
Mute, Solo, 2-Track, Control Room, Phantom 48V functions
4 Subgroups
24 bits internal EFX processor
Integrated USB media Player
13 Faders

Mono channels
Microphone inputXLR with balanced
Frequency response10Hz to 55KHz,+/-3dB
Distortion (THD+N)<0.03% at +0dB ,22Hz~22KHz A-weighted
Gain range0dB to 50dB
Max. Input+21 dB
LOW CUT75Hz
SNR<-100dBr A-weighted
Phantom power+48V with switch control
Line input1/4” TRS with balanced
Frequency response10Hz to 55KHz,+/-3dB
Distortion (THD+N)<0.03% at +0dB ,22Hz~22KHz A-weighted
Sensitivity range+20dB~ -30dB
CompressorGAIN: 0~9dB / THRESHOLD: 20dB—>5dB
Stereo input channels
Mic inputXLR with balanced
Line input1/4′ TRS with balanced
Frequency response10Hz to 55KHz, +/-3dB
Distortion (THD+N)<0.03% at +0dB ,22Hz~22KHz A-weighted
Sensitivity range+20dBu~ -30dBu
SNR<-100dBr A-weighted
RCA input channels
RCA inputRCA with un-balanced
Frequency response10Hz to 55KHz,+/-3dB
Distortion (THD+N)<0.03% at +0dB ,22Hz~22KHz A-weighted
Sensitivity range+20dBu~ -30dBu
SNR<-100dBr A-weighted
Channels EQ
ChannelMono / Stereo
High+/-15dB @12KHz / +/-15dB @12KHz
Mid+/-15dB @100KHz -8KHz / +/-15dB @3KHz or +/-15dB @500Hz
Low+/-15dB @80Hz / +/-15dB @80Hz
Impedances
Microphone input1.8K Ω
All other input10K Ω or greater
Tape out1K Ω
All other out120 Ω
DSP section (options)
A/D and D/A converters24bit
Type of effectsVocal, Small Room, Large Hall, Echo, Echo+Verb, Flange+Verb, Plate, Chorus+GTR, Rotary+GTR, Tremolo+GTR
Controls100 position preset selector(10 preseter * 10 variation), Mute switch & Foot-switching with LED indicator
FOOT-SWTIP: FX – SLEEVE: GND
Main mix section
Max. MAIN MIX output+26dBu XLR balanced (+20dBu un-balanced)
AUX rangeOFF to +10dB
Fader rangeOFF to +10dB
PHONES/CONTROL-ROOM rangeOFF to +10dB
Hum & Noise<-80dB @ 20Hz~22KHz A-weighted, 1 channel & MAIN level:0dB, the other: Minimum
Crosstalk<-80dB @ 0dB 20Hz~22KHz A-weighted, MAIN level:0dB, the other :minimum
Power supply
Main voltage100-240V~ 50/60Hz
FuseT1.25A AC250V
Rated power consumption30W

Wharfedale SL824USB

SPECIFICATIONS

Channels 12
Inputs 10 x XLR, 12 x 6.3mm Jack
Outputs 2 x XLR, 2 x 6.3mm Jack
Headphone Output 6.3mm Jack
FX 16x Effects: (1)Hall1 (2)Hall2 (3)Room1 (4)Room2 (5)Room3(6)Platereverb1 (7)Platereverb2 (8)Platereverb3 (9)Chorus(10)Flange (11)Delay1 (12)Delay2 (13)Chorus/Room1(14)Chorus/Room2 (15)Bypass (16)Rotaryspeaker
EQ 3 Band with HPF
Phantom Power Yes
USB 16bit / 48kHz
Signal To Noise Ratio -127dBu ±5dBu Mic Pre Equivalent Input Noise
Frequency Response 20Hz~20kHz ±2dB
Display 12 Segment Level LED with power and Phantom Power indicator
Dimensions: (H x W x D) 80mm x 400mm x 369mm
Weight 5.2kg

Wharfedale Pro Connect 1202FX/USB

SPECIFICATIONS

Channels 12
Inputs 4 x XLR, 12 x 6.3mm Jack
Outputs 4 x 6.3mm Jack
Headphone Output 6.3mm Jack
EQ 3-Band
FX 56 FX Logic Acoustic Modelling FX: Room, Plate, Hall and Gated Reverb, Chorus, Flanger, Rotary speaker, Delay
Phantom Power Yes
USB 16-bit / 48kHz
Signal To Noise Ratio >78dB ±5dB @ Max Gain
Frequency Response 20Hz-20kHz ±1dB
Display Dual 4-Segment LED, FX Setting Display
Dimensions (H x W x D) 360.2mm x 183.8mm x 52.8mm
Weight 1.69kg / 3.3lbs

Wharfedale Pro Connect 1002FX/USB

SPECIFICATIONS:

Channels 10
Inputs 2 x XLR, 10 x 6.3mm jack
Outputs 4 x 6.3mm jack
Headphone Output 6.3mm Jack
EQ 3-Band
FX 56 FX Logic Acoustic Modelling FX:Room, Plate, Hall and Gated Reverb. Chorus, Flanger, Rotary Speaker, Delay
Phantom Power Yes
Signal To Noise Ratio >78dB ±5dB @ Max Gain
Frequency Response 20Hz-20kHz ±2dB
Display Dual 4-Segment LED, FX Setting Display
Dimensions: (H x W x D) 293.9mm x 83.8mm x 52.8mm
Weight 1.37kg

Soundcraft EFX12

Features

  • 8+2 and 12+2 channel frame sizes
  • Built-in 24 bit Lexicon digital effects processor
  • 32 FX settings
  • Tap Tempo and FX setting store function
  • 1 FX send on each channel
  • 1 configurable auxiliary bus
  • XLR-type and ¼” metal jack connector sockets
  • RCA phono stereo playback inputs and record outputs
  • 3-band EQ with a swept mid on mono inputs
  • 3-band EQ on stereo inputs
  • TRS insert sockets and inserts on all mono inputs
  • Ten-segment LED output metering
  • Intuitive and comprehensive solo system
  • Headphone output
  • Easily rack mountable
  • Custom Karaoke preset

The Soundcraft EFX will find itself in many applications including live music, recording, houses of worship and multi-speaker installations.

Mi12 Compact (12-channel 2-bus mixer)

System type: Compact 12-channel 2-bus mixer
Input Connectors:
Mic Input: Balanced XLR-F
Line Input: Balanced JACK
Input Sensitivity:
MONO INPUT CHANNEL – Mic Input: from -10 to -50 dB
MONO INPUT CHANNEL – Line Input: from +20 to -40 dB
STEREO INPUT CHANNEL – Line Input: +4 / -10 dB
Input Impedance:
MONO INPUT CHANNEL – Mic Input: 2 Kohm
MONO INPUT CHANNEL – Line Input:10 Kohm
STEREO INPUT CHANNEL – Line Input: 10 Kohm
Output Connectors: Unbalanced JACK
Output Levels: Maximum level all outputs: +22 dBu
Headphones output impedance: 32 ohm
Mono Input channel equalization:
HIGH (shelving): ±15 dB @ 12KHz
MID (peaking): ±15 dB @ 2.5KHz
LOW (shelving): ±15 dB @ 80Hz
Effects: 256 (16 presets x 16 variations): HALL, ROOM, VOCAL and PLATE reverbs STEREO and MONO TAP DELAY REV + DELAY, REV + TAP DELAY, REV + CHORUS
Crosstalk (meas. at 1 KHz): > 82 dBu
HUM & Noise unweighted: < -93 dBu THD + Noise at +4dB, 1kHz: < 0,008 % Power Supply: 18 VAC 500 mA (use only supplied AC/AC ADAPTER) Power consumption: 32 W Weight: 2 lb Dimensions (W x H x D): 254x302x60 mm

Behringer XENYX 1002

Type – Analog
Channels – 6
Inputs – Mic Preamps – 2 x XLR
Phantom Power – 2
Inputs – Line – 10 x TRS
Inputs – Other – 2 x RCA
Outputs – Main – 2 x TRS
Outputs – Other – 2 x RCA, 2 x TRS
Headphones – 1 x 1/4″
EQ Bands – 3-band
Effects – Yes
Aux Sends – 1 x Post
Send/Return I/O – 1 x TRS (Send)
Faders – 1 x 60mm
Height – 3,81 cm – 4.8 cm
Width – 18.8 cm
Depth – 20.32 cm
Weight – 1.05 kg

Soundcraft EFX8

8+2 and 12+2 channel frame sizes
Built-in 24 bit Lexicon digital effects processor
32 FX settings
Tap Tempo and FX setting store function
1 FX send on each channel
1 configurable auxiliary bus
XLR-type and ¼” metal jack connector sockets
RCA phono stereo playback inputs and record outputs
3-band EQ with a swept mid on mono inputs
3-band EQ on stereo inputs
TRS insert sockets and inserts on all mono inputs
Ten-segment LED output metering
Intuitive and comprehensive solo system
Headphone output
Easily rack mountable
Custom Karaoke preset

Proel M1622USB

System type: Compact 16-channel 4-bus mixer
Input Sensitivity:
MONO INPUT CHANNEL – Mic Input: from 0 to -60 dB
MONO INPUT CHANNEL – Line Input: from +20 to -40 dB
STEREO INPUT CHANNEL – Mic Input: -0 / -40 dB
STEREO INPUT CHANNEL – Line Input: +20 / -20 dB
Input Impedance:
MONO INPUT CHANNEL – Mic Input: 2 Kohm
MONO INPUT CHANNEL – Line Input:10 Kohm
STEREO INPUT CHANNEL – Mic Input: 2 Kohm
STEREO INPUT CHANNEL – Line Input: 10 Kohm
Mono Input channel equalization:
HIGH (shelving): ±15 dB @ 12KHz
MID (peaking): ±15 dB from 100 Hz to 8 kHz
LOW (shelving): ±15 dB @ 80Hz
Stereo Input Channel Equalization:
HIGH (shelving): ±15 dB @ 12KHz
HI-MID (peaking): ±15 dB @ 3KHz
LO-MID (peaking): ±15 dB @ 500Hz
LOW (shelving): ±15 dB @ 80Hz
Effects: 256 (16 presets x 16 variations): HALL, ROOM, VOCAL and PLATE reverbs STEREO and MONO TAP DELAY REV + DELAY, REV + TAP DELAY, REV + CHORUS
Crosstalk (meas. at 1 KHz): > 82 dBu
Noise: HUM & Noise unweighted: < -93 dBu THD + Noise at +4dB, 1kHz: < 0,008 % Power Supply: Internal power supply Mains Supply Voltage: 110-240 VAC (±10%) 50 / 60 Hz available with Europe mains cord (Shucko plug), Power consumption: 75 W Weight: 2,95 kg Dimensions - 465 x 91 x 462 mm

Soundcraft Signature 22

Channels – 22
Soundcraft® Ghost Preamps – 16
Soundcraft® Sapphyre EQ – 4-band (2 bands of swept mids)
dbx® Limiters on inputs – 8
Lexicon® Effects – Dual Engine
USB Interface – 2-in/2-out
Auxes – 5
Subgroups – 4 mono/2 stereo
Faders – 100mm

Soundcraft Signature 12

Channels – 12
Soundcraft® Ghost Preamps – 8
Soundcraft® Sapphyre EQ – 3-band (1 band of swept mids)
dbx® Limiters on inputs – 2
Lexicon® Effects – Single Engine
USB Interface – 2-in/2-out
Auxes – 3
Subgroups – 2 mono/1 stereo
Faders – 60mm

PROEL HPAMP104

Input Section
Inputs 1 stereo
Input Impedance 500 Kohm
Max Input Level +15 dBu
Connectors 1/4″ jack stereo, 2 x RCA
Output Section
Outputs 4 stereo
Maximum output (2x) 45mW @ 100 ohm (each)
Load Impedance minimum 16 ohm per channel
Max gain +20 dB each channel
Connector 1/4″ jack stereo (each output)
System Performance
Distortion (THD) 0.02 %
Noise < -98 dBu unweighted Frequency Response 20 Hz - 20 KHz (-3 dB) General
Controls OUTPUT LEVEL, INPUT STEREO/MONO
Indicators Power ON
Power supply 12-18 VDC (adapter included)
Dimensions (W x H x D) 152 x 50 x 72 mm
Weight 0,8 Kg

PROEL PHANTOM100

Input Connector 1 x XLR-F
Ouput Connector 1 x XLR-M
Output Phantom Power 48V DC +/-2V
Frequency Response 20 Hz – 20 KHz (-3 dB)
Controls ON/OFF switch
Indicators Power ON
Power supply 9V DC (adapter included)
Dimensions (W x H x D) 134 x 50 x 72 mm
Weight 0,7 Kg

Wharfedale Pro SR806

Specifications:

• Internally impedance balanced circuitry
• 8 mono channels
– XLR / ¼” TRS inputs with HPF
– Studio grade microphone preamps
– 25dB pad
– 3 band parametric EQ
– 48v phantozm power
• 4 stereo channels
– ¼” TRS inputs
– 4 band EQ
• 2x 192kHz/24 bit FX processors
• 4 stage metering per channel
• 12 stage master metering
• PFL on all channels
• AFL on all sends
• 5 auxiliary sends
– 2 monitor mixes
– 1 subwoofer output with LPF
– 2 FX sends
• 4 sub groups with direct outs
• Stereo RCA line level input
• Break button
• XLR and ¼” TRS main outputs

Behringer XENYX X1832

Specifications:

– Premium ultra-low noise, high headroom analog mixer
– 6 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps
– 6 studio-grade compressors with super-easy “one-knob” functionality and control LED for professional vocal and instrumental sound
– Neo-classic “British” 3-band EQs with semi-parametric mid band for warm and musical sound
– New studio-grade FX processor with 16 editable presets including reverb, chorus, flanger, delay, pitch shifter, multi-effects, Tap function and storable user parameter settings
– Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins and ultra-low latency driver downloadable at www.behringer.com
– 9-band stereo graphic EQ allows precise frequency correction of monitor or main mixes
– Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies
– Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image
– Voice Canceller function for easy-to-use sing-along applications
– Channel inserts on each mono channel for flexible connection of outboard equipment
– 3 aux sends per channel: 1 pre fader for monitoring, 1 pre/post fader switchable for monitoring/FX applications, 1 post fader (for internal FX or as external send)
– Clip LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all channels
2 subgroups with separate outputs for added routing flexibility and 2 multi-functional stereo aux returns with flexible routing
– Balanced main mix outputs with ¼” jack and gold-plated XLR connectors, separate control room, headphones and stereo rec outputs
– Control room/phones outputs with multi-input source matrix; rec inputs assignable to main mix or control room/phones outputs
– “Planet Earth” switching power supply for maximum flexibility (100 – 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving

Behringer XENYX X1204USB

Specifications:

– Premium ultra-low noise, high headroom analog mixer
– 4 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps
– 4 studio-grade compressors with super-easy “one-knob” functionality and control LED for professional vocal and instrumental sound
– Neo-classic “British” 3-band EQs for warm and musical sound
– New studio-grade FX processor with 16 editable presets including reverb, chorus, flanger, delay, pitch shifter, multi-effects, Tap function and storable user parameter settings
– Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins and ultra-low latency driver downloadable at www.behringer.com
– 2 aux sends per channel: 1 pre/post fader switchable for monitoring/FX applications, 1 post fader (for internal FX or as external send)
– Clip LEDs, mute/alt 3-4, solo and PFL functions on all channels
– 2 subgroups with separate outputs for added routing flexibility
– 2 multi-functional stereo aux returns with flexible routing
– Balanced main mix outputs with gold-plated XLR connectors plus separate control room, headphones and 2-track outputs
– Control room/phones outputs with multi-input source matrix
– Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
– “Planet Earth” switching power supply for maximum flexibility (100 – 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving

Behringer XENYX 1204USB

Specifications:

– Premium ultra-low noise, high headroom analog mixer
– 4 state-of-the-art XENYX, phantom-powered Mic Preamps comparable to stand-alone boutique preamps
– 4 studio-grade compressors with super-easy “one-knob” functionality and control LED for professional vocal and instrumental sound
– Neo-classic “British” 3-band EQs for warm and musical sound
– Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins and ultra-low latency driver downloadable at www.behringer.com
– 2 aux sends per channel: 1 pre fader for monitoring applications, 1 post fader for external FX devices
Clip LEDs and mute/alt 3-4 function on all channels
– 2 subgroups with separate outputs for added routing flexibility
– 2 multi-functional stereo aux returns with flexible routing
– Balanced main mix outputs with gold-plated XLR connectors plus separate control room, headphones and stereo tape outputs
– Control room/phones outputs with multi-input source matrix
– Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
– “Planet Earth” switching power supply for maximum flexibility (100 – 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving

PROEL Mi10

Specifications:

System type – Compact 10-channel 2-bus mixer
Input Connectors – Mic Input: Balanced XLR-F: Line Input: Balanced JACK
Input Sensitivity –
– MONO INPUT CHANNEL – Mic Input: from -10 to -50 dB
– MONO INPUT CHANNEL – Line Input: from +20 to -40 dB
– STEREO INPUT CHANNEL – Line Input: +4 / -10 dB
Input Impedance-
– MONO INPUT CHANNEL – Mic Input: 2 Kohm
– MONO INPUT CHANNEL – Line Input:10 Kohm
– STEREO INPUT CHANNEL – Line Input: 10 Kohm
Output Connectors – Unbalanced JACK
Output Levels – Maximum level all outputs: +22 dBu
Headphones output impedance – 32 ohm
Effects – 256 (16 presets x 16 variations): HALL, ROOM, VOCAL and PLATE reverbs STEREO and MONO TAP DELAY REV + DELAY, REV + TAP DELAY, REV + CHORUS
Crosstalk (meas. at 1 KHz) – > 82 dBu
HUM & Noise unweighted – < -93 dBu THD + Noise at +4dB, 1kHz - < 0,008 % Power Supply - 18 VAC 500 mA (use only supplied AC/AC ADAPTER) Power consumption - 32 W Weight - 0.68 kg. Dimensions - 200x266x60 mm

Wharfedale Pro Connect 802 USB

Specifications:

Channels – 6
Inputs – 2 x XLR, 6 x 6.3mm jack
Outputs – 2 x 6.3mm jack
Headphone Output – 6.3mm jack
EQ – 3 Band
Phantom Power – Yes
Signal To Noise Ratio – >78dB ±5dB @ Max Gain
Frequency Response – 20Hz-20kHz ±2dB
Display – Dual 4-Segment LED
Dimensions – 50.9mm x 208mm x 183.8 mm
Weight – 0.92kg / 1.9kg

Wharfedale Pro Connect 502 USB

Specifications:

Channels – 5
Inputs – 1 x XLR, 5 x 6.3mm jack
Outputs – 2 x 6.3mm jack
Headphone Output – 6.3mm Jack
EQ – 2-Band
Phantom Power – Yes
Signal To Noise Ratio – >78dB ±5dB @ Max Gain
Frequency Response – 20Hz-20kHz ±2dB
Display – Dual 4-Segment LED
Dimensions -50.9mm x 143mm x 183.8 mm
Weight – 0.64 kg/1.62kg