Category: vocal-mics

DM580

Transducer type: Moving Coil Dynamic
Polar pattern: cardioid
Frequency response: 50 Hz – 16 kHz
Sensitivity: -52dBV ± 3 dB
Maximum SPL for 0.5% THD: 137 dB
Nominal Impedance: <400 Ohm Reccommended Load Imp: 1500 Ohm Connectors: 3 Pin Male XLR Dimension: L. 164mm X ø 51mm Weight: 301 gr

SHURE BETA 58A

Type – Dynamic (moving coil)
Frequency Response – 50 to 16,000 Hz
Polar Pattern – Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.
Output Level – Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV) *1 Pa = 94 dB SPL

SHURE SM58

Type – Dynamic (moving coil)
Frequency Response – 50 to 15.000 Hz
Polar Pattern – Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency

Sennheiser E935

Dimensions 47 x 151 mm
Connector XLR-3
Frequency response (microphone) 40 – 18000 Hz
Weight 355 g
Sensitivity in free field, no load (1kHz) 2,8mV/Pa = -51dB (0 dB = 1V/Pa) = -71 dB (0 dB = 1V/ubar)
Nominal impedance 350 Ω
Min. terminating impedance 1000 Ω

PROEL DM585

Specifications:

Dynamic microphone
Transducer type : Moving coil
Polar pattern : Cardioid
Frequency response ( +/- 3 dB ) : 50 – 17000 Hz
Sensitivy 1 Khz : -52 dB +/-3dB
Impedance : 400 Ohm
Connector : 3 pin XLR male
Weight : 320 gr
Dimensions : L.180 mm x 44 mm

PROEL DM55

Specifications:

Transducer type: Moving Coil Dynamic
Polar pattern: cardioid
Frequency response: 50Hz-16 kHz
Sensitivity: -53dBV ± 3 dB
Maximum SPL for 0.5% THD: 130dB
S/N Ratio: 74dB
Nominal Impedance: 300 Ohm
Connectors: 3 Pin Male XLR
Dimension: L. 180mm X ø 45mm
Weight: 360 gr

PROEL DM581USB

Specifications:

Transducer type: Moving coil
Polar Pattern: Cardioid
Frequency response: 60 – 14.000 Hz
Sensitivity: 1kHz -53 dBv +/-3dB Analog output; -28 dBv +/-3dB Digital output
SPL for 1% THD: 120dB
Impedance: 600 ohm
A/D converter: 16 bit at 48 Khz sampling rate
Connector: 3 pin XLR
Connection standard: USB 1.1 , USB 2.0
Weigth: 290 g
Dimension: H.185 mm x Ø 51 mm

PROEL DM580LC

Specifications:

Transducer type : Moving coil
Polar pattern : Cardioid
Frequency response ( +/- 3 dB ) : 70 – 14000 Hz
Sensitivy 1 Khz : -55 dB +/-3dB
Maximum SPL for 1% THD : 135 dB
S/N ratio : 74 dB
Impedance : 600 Ohm
Connector : 3 pin XLR male
Weight : 275 g
Dimensions : L.195 mm x 50 mm

Wharfedale Pro DS 1.0S

Specifications:

Transducer type: Dynamic
Polar pattern: Cardioid
Frequency response ( +/- 3 dB ): 60 – 16000 Hz
Diaphragm material: Neodymium
Sensitivy 1 Khz: -52 dB
Maximum SPL for 1% THD: 130 dB
Impedance: 600 Ohm
Connector: 3 pin XLR male
Weight: 270 g

Wharfedale Pro DS 4.0S

Specifications:

Transducer type: Dynamic
Polar pattern: Super-Cardioid
Frequency response ( +/- 3 dB ): 45 – 18000 Hz
Diaphragm material: Neodymium
Sensitivy 1 Khz: -53 dB
Maximum SPL for 1% THD: 136 dB
Impedance: 25Ohm
Connector: 3 pin XLR male
Weight: 330 g

PROEL DM800

Specifications:

Transducer type: Moving coil
Polar pattern: Cardioid
Frequency response ( +/- 3 dB ): 60 – 14000 Hz
Sensitivy 1 Khz: -53 dB +/-3dB
Maximum SPL for 1% THD: 130 dB
Impedance: 600 Ohm
Connector: 3 pin XLR male
Weight: 260 g
Dimensions: L.180 mm x 45 mm